(469) 436-6127
Print shop software and services · Dallas, TX
We print 80,000 inches a day. This is the software that does it.
We could not buy tools that kept up with our own DTF shop, so we wrote them. Now any print shop can run the same four, from the customer's upload to a print-ready sheet at the press.
Real DTF Center designs, the kind these tools nest, check and send to press every day
Four tools, one order
Pick the place your orders go wrong.
Use one, or run all four. Each hands off to the next.
Order in. Shipped out. One system runs the floor.
Not just prepress. It follows every order until it leaves your shop.
Also built inCustomer proof linksRush and SLA flagsFront-desk pickup portalShop-floor wallboardBuilt-in ticketsLoyalty discountsMulti-location
You keep your RIP, your printer and your people. The file handling goes away.
It picks up orders, checks the artwork, names the files, nests them on the roll and drops them in your RIP's hotfolder. You keep your own RIP and printer. Built for Shopify shops running 25+ orders a day.
From $299/month60-day free trial · $750 one-time setup · Shopify store required
| One 18-design order | By hand | Automated |
|---|---|---|
| Order to press-ready file | 45 min | 90 sec |
| People touching it | 4–5 | 1 |
| Prepress cost | $14.80 | $1.20 |
| Reprint rate | 6.4% | 0.3% |
Small$299 /month750 orders included, then 50¢ each
Medium Most shops$799 /month2,000 orders included, then 45¢ each
Large$1,499 /month4,000 orders included, then 40¢ each
Your customers build the sheet. You get a 300 DPI file.
The builder our own customers use on dtfcenter.com. It works on a phone, in 16 languages, on any Shopify theme, with no code changes.
Free to install4% per print-ready file, capped at $12 per order. No monthly minimum.
- Wizard and Manual modesAuto-layout or a full canvas.
- AI Chat BuilderDescribe the sheet, it builds itself.
- Neck Label CreatorTagless labels, per size.
- Names & NumbersPaste a roster, one graphic per player.
22 × 60 in sheetIllustration
gnomes.png OKcrew-masks.png OKphoto.jpg LOWking.png OK
Stop bad artwork at upload, before it reaches the press.
Customers see their real print resolution the moment they upload, and fix a low-resolution file with one click. Fewer emails. Fewer reprints.
From $9/month7-day free trial on every plan · save 17% yearly
Upload check · try itPrint size 11 × 14 in
mardi-gras-king.png
Resolution at print size96 DPI
LOWStandard$9 /monthUploads, crop and rotate, real-time DPI check, auto-trim.
Pro$19 /monthAdds AI upscaling for low-resolution images and priority support.
Print Pro For DTF$29 /monthAdds white edge and halo fix and DTF / DTG / UV print optimization.
Colour built for your printer, your ink, your film.
A generic profile was made for someone else's setup. We build profiles for our own production printers, and we will build one for yours.
$2,500 per profileBuilt for CADlink.
- 1. Tell us your setupPrinter, RIP, ink, film, powder.
- 2. Print our targetPrint it, press it, mail it to us.
- 3. We measure and buildFor that exact combination.
- 4. Load it and printProfile file plus settings.
Profiling targetIllustration
DTF Automation · savings estimate
What does prepress by hand cost your shop?
Plan picked for you: Medium
You keep, every month
$5,897
$7,704by hand today
$1,807with DTF Automation
275 hof prepress time back
Estimate. Assumes 6 minutes of file handling per order by hand and 30 seconds automated, a 6.4% reprint rate by hand against 0.3%, and $12 per reprint. Plan cost includes overage orders.
Fair questions
Why would a printer sell its tools?
You are a DTF printer. Why sell to other shops?
The software is a separate business, built and supported by our software company, Neural Matrix. We use it every day. If it breaks, our own orders stop, so it gets fixed.
Can DTF Center see my orders or customers?
Each store's records are isolated from every other store's. Your customer and order data is never shared with our print business.
Do I have to change my RIP or printer?
No. DTF Automation delivers files to the hotfolder of the RIP you already run. Nothing is installed on the RIP PC.
Do I need Shopify?
For the three software products, yes. Gang Sheet PRO and Upload PRO are Shopify apps, and DTF Automation requires a Shopify store. ICC profiles work for any shop.
See it run on a real production floor.
Book 15 minutes. We show you an order going from checkout to the press, and tell you which tools fit your volume.
