Using a DTF (Direct to Film) heat press is a straightforward process that can help you achieve professional-quality prints on your garments. Follow these steps to get the best results:
1. Prepare Your Design: Print your DTF design on the special DTF film using a DTF printer. Make sure your design is mirror-imaged before printing.
2. Preheat the Press: Set your heat press to the recommended temperature, usually around 320°F (160°C). Allow it to fully heat up before starting.
3. Pre-press the Garment: Place your garment on the heat press and pre-press it for 5-10 seconds. This removes any moisture and wrinkles, ensuring a smooth application.
4. Position the Design: Place the printed DTF film on the garment with the design facing down. Make sure it is aligned correctly.
5. Press the Design: Close the heat press and apply pressure for 15-20 seconds. Follow the specific time and temperature settings recommended for your DTF film.
6. Cool Peel: Allow the garment to cool down completely before peeling off the film. This step is crucial for the design to adhere properly.
7. Final Press: To ensure durability, you can do a final press with a piece of parchment paper or a Teflon sheet over the design for another 10-15 seconds. Enjoy your custom-designed garment! For more tips and DTF products, visit our website dtfcenter.com.
